Use tungsten carbide burrs on hard materials including steel, aluminum and surefire, all sorts of stone, ceramic, porcelain, wood floor, acrylics, fibreglass and reinforced plastics. When applied to soft metals including gold, platinum and silver, carbide burrs are great because they will last for a long time without breaking or chipping.
Different cuts of carbide burrs is going to be best suited for certain materials.
Uses for SB-3 Carbide Burr Die Grinder Bit
Use carbide burrs in air tools like die grinders, pneumatic rotary tools and also speed engravers. Micro Motors, Pendant Drills, Flexible Shafts, and hobby rotary tools for instance a Dremel.
Carbide burrs are trusted for metalworking, tool making, engineering, model engineering, wood carving, making jewelry, welding, chamferring, casting, deburring, grinding, cylinder head porting and sculpting. Carbide burrs are widely-used within the aerospace, automotive, dentistry, stone and metalsmith industries.
What SB-3 Carbide Burr cut should you?
Single cut (one flute) carbide burrs have a very right handed (up cut) spiral flute. Single cut can be used with stainless, hardened steel, copper, iron and ferrous metals and definately will remove material quickly with a smooth finish. Use for heavy stock removal, milling, deburring and cleaning.
Heavy removing material
Milling
Deburring
Cleaning
Creates long chips
Use double cut carbide burrs on ferrous and non ferrous metals, aluminium, soft steel as well as for all non-metal materials like stone, plastics, hard wood and ceramic. This cut has more cutting edges and definately will remove material faster. Double cut also referred to as Diamond Cut or Cross Cut (2 flutes cut across one another) and definately will leave a smoother finish than single cut due to producing smaller chips while they cut away the fabric. Use double cut for medium-light stock removal, deburring, finishing and cleaning. Double cut carbide burrs are most popular and work with most applications.
Medium- light elimination of material
Deburring
Fine finishing
Cleaning
Smooth finish
Creates small chips
What SB-3 Carbide Burr RPM speed should you use?
The speed at which you employ your carbide burr in your rotary tool depends on the material you’re deploying it on along with the contour being produced but it’s reliable advice you do not need over 35,000 RPM. When the burs are chipping easily this can be because of the speed being not fast enough. It’s ideal to begin the bur off slow, enhancing the speed during this process. High speeds minimizes clogging inside the flutes of your respective carbide burs.
Like all drill bits and burrs, permit the burr carry out the work and apply just a little pressure, otherwise the cutting edges from the flutes will chip away or become smooth too soon, reducing the time of your burr.
More details about SB-3 Carbide Burrs go to this useful web site