SA-1 cylinder shape burrs are perfect for interior contour work and deburring. Due to extreme hardness with this tungsten carbide, it can be used on considerably more demanding jobs than HSS (High-Speed Steel). These carbide burrs are constructed with tungsten carbide burr die grinder bits and definately will begin to soften at higher temperatures, so carbide is definitely a good choice for long-term performance.


Double cut or Cross cut carbide burrs are generally used on ferrous and non-ferrous metals, soft steel, and also for all non-metal materials including stone, plastics, wood floor, and ceramic. Double cut burrs will leave a rather smoother finish than single cut due to producing smaller chips as they cut away the fabric. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is regarded as the popular cut and may look at you through most applications.

Cut – Double Cut
Max RPM – 70,000, yet it’s uncommon to require a lot more than 35,000 RPM.

Machines Applied to:

Die Grinders and hand-held pneumatic grinders

Application:

Ferrous Materials – Cast Iron, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper

Other Materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone

Cylinder Shape burrs are ideal for interior contour work like peripheral and face milling.

Safety Tips & Techniques:

Tool speed is determined with the material you are using your burr on. If you might be experiencing chipping, you are most likely operating at excessive of speed for the application. Start having a slower speed and increase on the way and soon you reach the ideal results
Apply light pressure and let the tool perform the work. Bearing recorded on the tool will result in reduced tool life as well as a dull burr.

Always wear proper PPE to include (however, not tied to) safety glasses, hearing protection, respirator, and baseball gloves. Keep all guards in place on your machine.
Avoid experience electricity drills; the slower speeds may result in chipping of your respective workpiece.
For more info about SA-1 Carbide Burrs have a look at this useful internet page