Information It’s Important To Find Out About SA-1 Carbide Burrs

SA-1 cylinder shape burrs are great for interior contour work and deburring. Due to the extreme hardness of the tungsten carbide, technology-not only on considerably more demanding jobs than HSS (High-Speed Steel). These carbide burrs are constructed of tungsten carbide burr die grinder bits and may will soften at higher temperatures, so carbide is definitely a good choice for long-term performance.

Double cut or Cross cut carbide burrs tend to be used on ferrous and non-ferrous metals, soft steel, as well as all non-metal materials for example stone, plastics, hard wood, and ceramic. Double cut burrs leaves a somewhat smoother finish than single cut because of producing smaller chips as they cut away the information. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is the most popular cut and can help you through most applications.

Cut – Double Cut
Max RPM – 70,000, yet it’s uncommon to require more than 35,000 RPM.

Machines Used On:

Die Grinders and hand-held pneumatic grinders

Application:

Ferrous Materials – Certain, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper

Many other materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone

Cylinder Shape burrs are good for interior contour work like peripheral and face milling.

Safety Tips & Techniques:

Tool speed is determined from the material you use your burr on. If you might be experiencing chipping, you’re probably operating at excessive of speed for that application. Start having a slower speed while increasing on the way unless you reach the ideal results
Apply light pressure and let the tool do the work. Bearing down on the tool can lead to reduced tool life plus a dull burr.

Always wear proper PPE to feature (however, not limited to) safety glasses, hearing protection, respirator, and hand protection. Keep all guards in position on the machine.
Avoid use on electricity drills; the slower speeds can lead to chipping of the workpiece.
Check out about SA-1 Carbide Burrs just go to our website