Carbide Burrs (also referred to as Rotary Burrs) can be used for cutting, shaping, grinding as well as the removing sharp edges, burrs and excess material (deburring).
1. What material can Carbide Burrs be utilized on?
Carbide burrs may be used on many materials. Metals including steel, aluminum and cast iron, all kinds of wood, acrylics, fibreglass and plastics. When utilized on soft metals like gold, platinum and silver, carbide burrs are great since they can last a very long time without any chipping or breaking.
Steel, Carbon Steel & Stainless Steel
Iron
Aluminium
Titanium
Cobalt
Nickel
Gold, Platinum & Silver
Ceramics
Fibreglass
Plastic, Carbon fibre Reinforced Plastic (CRP), Glass Fibre Reinforced Plastic (GRP)
Brass, Copper & Bronze
Zinc
Wood
Different cuts of carbide burrs will likely be ideal to specific materials, understand the next point below to discover more about the several cuts.
Exactly what do You employ Carbide Burrs In?
Ideally carbide burrs are utilized in Air Tools i.e Die Grinders, Pneumatic rotary tools and high speed engravers. Micro Motors, Pendant Drills, Flexible Shafts, and hobby rotary tools like a Dremel.
Only use a handpiece that runs true i.e with no wobble.
Who Uses Carbide Burrs?
Carbide burrs are traditionally used for metalwork, tool making, engineering, model engineering, wood carving, jewellery making, welding, chamferring, casting, deburring, grinding, cylinder head porting and sculpting. And are utilized in the aerospace, automotive, dental, metal sculpting, and metal smith industries to name only a few.
2. Carbide Burrs Commonly Can be found in Two Cuts; Single Cut and Double Cut (Diamond Cut)
Single cut (one flute) carbide burrs possess a right handed (Up cut) spiral flute. These are generally used in combination with stainless steel, hardened steel, copper, surefire, and ferrous metals and definately will remove material quickly having a smooth finish. Use for heavy stock removal, milling, deburring and cleaning.
Heavy removing material
Milling
Deburring
Cleaning
Creates long chips
Double cut carbide burrs usually are suited for ferrous and non ferrous metals, aluminium, soft steel and for all non-metal materials including plastics and wood. They’ve got more cutting edges and will remove material faster. Double cut are now and again referrred to as Diamond Cut or Cross Cut (2 flutes cut across one another) leaves a smoother finish than single cut due to producing smaller chips since they cut away the information. Use for medium-light stock removal, deburring, finishing and cleaning. A dual cut carbide burr is regarded as the popular cut and can see you through most applications.
Medium- light removing material
Deburring
Fine finishing
Cleaning
Smooth finish
Creates small chips
3. What Speed or RPM the use of your Carbide Burrs?
The speed at which you use your carbide bur in your rotary tool will depend on the fabric you use it on and the contour being produced but it is safe to say you don’t to exceed speeds of 35,000 RPM.
4. Don’t Apply A lot of Pressure
As with most drill bits and burrs, permit the burr perform the work and apply only a little pressure otherwise the cutting edges from the flutes will chip away or become smooth prematurely, lowering the life of your burr.
5. Carbide Burrs are Harder Than HSS Burrs
Our Carbide Burrs are machine ground from the specially chosen grade of carbide. As a result of extreme hardness of the Tungsten Carbide they could be utilized on far more demanding jobs than HSS (Broadband Steel).
Carbide Burrs also perform better at higher temperatures than HSS in order to run them hotter, and then for longer.
HSS burrs will begin to soften at higher temperatures so carbide is usually a better option for long term performance.
Do you know the Advantages of Tungsten Carbide Burrs?
Longevity
Use for too long production runs
High stock removal
Well suited for using on many hard and hard materials
Ideal for Deburring, finishing, carving, shaping and smoothing welds, moulds, dies and forgings
6. Keep your Carbide Burr On the road
When using your carbide burr try not to ensure that is stays still for days as this minimizes the burr from digging and jabbing to your material causing unsightly marks and roughness.
End by using an ‘up’ stroke for a smoother finish in your work.
Stay Safe:
Always make sure your burr shank is well inserted into the collet and clamped down tightly
Keep pressure light and make the bur moving, focusing on the greatest material first
Keep your tasks are secured tightly for your work bench
Don’t snag or jam your burr into the work
Wear eye protection at least, but on top of that work with a full shield on your face
To read more about SF-1 Carbide Burrs check out the best site