Recommendations a list of the most widespread shapes of carbide burrs:

Cylinder end-cut shape
Cylinder end-cut shape contains a flat end and it is helpful for working on materials which may have right angles along with eliminating features. When completing contours on materials, a trendy solid carbide burr. Flat surfaces are taken off the majority of materials. Carbide cylindrical form end cut burs can be utilized for either end or side cutting because of the versatile nature. Deburring and polishing flat bottom holes and slots are a couple of common applications for them.


Cone shape
Deburring gear teeth, heat exchanger fan blades, inner bevel edges, and internal pipe edges are among the applications which is why cone-shaped carbide burrs are developed. A similar be a countersink, as well as chamfers the interior of holes deliberately.

Taper shape
The removing of round features from a workpiece generates a creation that is more seamless. An operating instrument that is in a position to access restricted locations and machine material surfaces

Flame shape
When cutting materials with round edges, make use of a carbide burr in the shape of a flame. The flame type of carbide burrs is meant to be used in deburring and polishing elliptic surfaces on steel dies, forgings, castings, and metal patterns.

Tree shape
being a tree to look at but with a pointy tip at the pinnacle. The round edges are ground with a series of carbide burrs in succession. This form enables us to easily access lengthy, tight locations where are inaccessible together with the most of the other shapes. Deburring and completing the deep contoured surfaces of steel dies, moulds, and metal patterns are the primary functions that Tree Shape carbide burrs are designed to do. Like be used to restore damaged places on dies that were brought on by slugs.

Oval shape
As you always work with assembling your project, this perfect carbide burr efficiently clears round edges on the workpiece which has been handed for you. Oval-shaped carbide burs are used for deburring and polishing curved surfaces in steel dies, forgings, castings, and metal patterns. These burs are constructed of an oval cross-section. They are utilized for that procedure for treating difficult fillet welds.

Ball shape
Carbide Deburring round bottom holes, curved slots, and curved metal and material surfaces are among the applications for which ball-shaped burs were devised. Likewise, you might use these phones widen or lengthen skin pores to enable you to treat hard fillet welds. The smooth machining coming from all round edges of workpieces, and also the preparation of workpieces for brazing, is done possible with the ball shape.
To read more about SB-9 Carbide Burrs have a look at our web site