Welcome to MistHub’s Help guide Tank Maintenance and Troubleshooting. Here we will discuss the way to perform routine maintenance on the tank atomizers to keep them functioning in good shape. We’re going to also talk over some common problems and their solutions. First, let’s take a look at how to properly utilize a brand-new tank or possibly a new coil you only placed in your tank.
Once you use a new coil you will want to make certain you prime it before making use of it. Priming a coil will assure that the wick in it is saturated with e-juice prior to its first use. This substantially lowers the possibility of burning your wick or damaging your coil. To prime your coil you will want to place 4-5 drops of e-juice straight into the coil head. Install the coil head by threading it to the tank’s base. You could then fill and assemble your tank. For the best results you ought to wait 5-10 minutes before its first use. In case you are in a big hurry and will not wait the 5-10 minutes you must at least wait 1-2 minutes, close the airflow and take several deep pulls without firing your device. You need to be in a position to then re-open the flow of air and use the tank normally without issue.
While it might seem just like a complex task to help keep your tank properly it is actually very easy. To start with you should maintain it clean. At least one time per month clean your tank. Start with removing the coil(s) and then any O-rings. While detaching the O-rings seek out signs of wear or any cracks. When the any O-rings are damaged, replace them. Clean your tank thoroughly using isopropyl alcohol or domestic hot water plus a mild dish soap for both the interior and out. Make sure you pay special attention to the threads (an old toothbrush is a good idea for this part). Be sure you wash your O-rings as well. Rinse it well, then rinse it again only to make certain there’s no soap or residue forgotten. When your uwell is totally dry you are ready to reassemble and then use it again.
The most common issue tank users are confronted with is leaks. A leaky tank can be a real inconvenience but typically they are relatively easy to fix. 99 percent of times a tank is leaking since it is letting air in somewhere which breaks the vacuum that holds your e-liquid within the tank. First, take the tank apart inspecting all glass or plastic parts trying to find any cracks. If you don’t go to whichever, confirm the O-rings for indications of damage or cracks. If any of the aforementioned mentioned parts are damaged at all replace them as required. Be sure you check and make certain the coil head itself is fully threaded into position however it is not overly tight. It needs to be easily removable without having to use tools. If it is too tight it may have damaged the O-ring(s) on the bottom with the coil or pushed them unnatural. When the O-rings about the coil are damaged replace them or entire coil. If the tank is constantly leak as well as these has been checked additionally, it can be linked to a negative coil head. As time passes and throughout use the wicking materials can break up and not hold the maximum amount of juice since they once did. This leads to deficiencies in surface tension allowing air to sneak in with the coil in that case it needs to be changed.
For details about uwell take a look at this popular site: here